Average Reviews:
(More customer reviews)I have not yet installed the system, so I can't report on its performance. The kit was very complete, and the components look robust and well-made. The wire supplied is only 12ga for a 20-foot run, and my preference is for a heavier gauge for that level of current, so I may replace the 12 with 10.
The thing I'm most dissatisfied with is the tank. Although it looks great on the outside at first glance, there are some serious deficiencies. First, it's not painted on the inside, just raw iron, and already starting to rust. Second, the ports are placed so that you can only mount the tank in a horizontal position. The ports on the rounded ends (2) are offset from center, and if you mount the tank vertically, there will be a small puddle of condensate that cannot be drained due to the offset position of the ports. This will result in heavy rusting at that area and premature failure of the tank. As a consequence of needing to mount the tank vertically in my application, I decided to buy a different tank with inside paint and a centered drain port.
So my final system is costing me $70 more than I thought -- in retrospect, I may have bought things piece-meal instead of as a kit if I'd known about the tank.
Click Here to see more reviews about: VIAIR Constant Duty Onboard Air System
Product Description:
VIAIR's Constant Duty Onboard Air System (OAS) is an all-in-one compressed air solution designed to work in conjunction with the vehicle it is mounted on. Included in this unit is a 150 PSI, 100% duty cycle VIAIR 450C compressor, a 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires 37" or larger. This powerful compression ability, along with the system's included pressure switch, 2.5 gallon air tank, multiple ¼" NPT port openings and more make it the perfect solution for users who need to go mobile with their pneumatic tool set. Compression for Most Applications Including Off Road
Rated for inflation of 37" tires and up as well as a variety of pneumatic tools, VIAIR's Constant Duty OAS is a match for, and tough enough for just about any compression application imaginable. The system is designed to be mounted on compatible vehicles, effectively creating a pneumatic workshop on wheels. Supplied components include a 100% duty cycle 450C compressor with 150 PSI capabilities, a 2.5 gallon air tank, a pressure switch with relay, a dash panel gauge with on/off switch and a variety of additional components needed to install the working system in your vehicle. As the "Constant Duty" name implies, this system is designed for heavy continuous work, yet although it does not require resting, it should not be run for more than an hour at a time. No matter the task, the Constant Duty Onboard Air System can supply the air needed to get jobs done.
150 PSI of continuous power available from your vehicle.
Viewlarger.
Want to read more honest consumer review about VIAIR Constant Duty Onboard Air System now ?
No comments:
Post a Comment